ComicDom1
December 21st, 2007, 01:11 AM
First I want to say hello to everyone because I have not been on this site for a while. Second, I want to wish everyone a happy holiday season.
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
wallpaper 2007 Ford Mustang Shelby Gt500
chanduv23
01-14 02:42 PM
IV can grow into a very strong organization in these lines being discussed. The best way to do it is to join the IVs State chapters and mobilize the community and do meets and greets and conduct seminars and many other constructive stuff
egoldy
01-30 04:50 AM
<3 AS3 Random Circle with Blend Mode by egoldy
lava lamp style FTW! :stare:
Thank you very much. :)
lava lamp style FTW! :stare:
Thank you very much. :)
2011 2007 Ford Mustang Shelby Gt500
jsb
05-27 01:02 PM
this is final stage of processing, get ready for GC stamp on passport.
Good luck.
I don't think you need a stamp on your passport? GC comes as a plastic card by mail. No more stampings !!
Good luck.
I don't think you need a stamp on your passport? GC comes as a plastic card by mail. No more stampings !!
more...
chenche19
04-01 11:57 AM
Gurus,
my and my wife received a denial letter from USCIS regarding our I-485 applications. My I-140 was approved on November 08'.
the weird thing is that I did not get an RFE of any kind... so, we decided to submit an MTR because:
1. the grounds for denial are wrong: no RFE on Medical and my case falls under visa gate - USCIS publication of July 23, 2007 states that USCIS will submitt an RFE on this matter.
2. denial over birth certificate??? anyway, it was submitted originally and USCIS just lost it in the process anyway no RFE on that either.
3. taken literally from the letter of denial "EVIDENCE OF EVIDENCE OF ELIGIBILITY MAINTANCE " I believe that is my I-94 -which we had submitted and the visa bulletin on june 2007 giving me the green light for I-140 and I-485.
so, we submitted an MTR based on this documents and I got the receipt date as March 17.
any thoughts and comments will be apreciated.
thanks,
my and my wife received a denial letter from USCIS regarding our I-485 applications. My I-140 was approved on November 08'.
the weird thing is that I did not get an RFE of any kind... so, we decided to submit an MTR because:
1. the grounds for denial are wrong: no RFE on Medical and my case falls under visa gate - USCIS publication of July 23, 2007 states that USCIS will submitt an RFE on this matter.
2. denial over birth certificate??? anyway, it was submitted originally and USCIS just lost it in the process anyway no RFE on that either.
3. taken literally from the letter of denial "EVIDENCE OF EVIDENCE OF ELIGIBILITY MAINTANCE " I believe that is my I-94 -which we had submitted and the visa bulletin on june 2007 giving me the green light for I-140 and I-485.
so, we submitted an MTR based on this documents and I got the receipt date as March 17.
any thoughts and comments will be apreciated.
thanks,
puskeygadha
06-02 09:22 PM
somehow they have to talk to DOL
morons..
but one out of many attorneys may have screwed up..why is everyone
being audited???
morons..
but one out of many attorneys may have screwed up..why is everyone
being audited???
more...
akhilmahajan
07-30 07:56 PM
EAD is based on pending I-485 and for filing 485, you just need 140 received. So you are OK. My uunderstanding is you can also use AC21 portability after 180 days to change employers as long as your employer doesn't revoke your I-140. So there is that risk with I-140 not approved.
P.S my I-140 app is pending with TSC from May 2006. Almost 425 days plus and still no update/no RFE. Even upgraded it to PP on Jun 18th 2007 but still nothing.
Did you try to contact some one at the office. Mine is March 2007, but just reading your case, it gives me butterflies. I dont know whats going on and with all the 485 applications god knows whats going to happen. I hope u get it soon.
P.S my I-140 app is pending with TSC from May 2006. Almost 425 days plus and still no update/no RFE. Even upgraded it to PP on Jun 18th 2007 but still nothing.
Did you try to contact some one at the office. Mine is March 2007, but just reading your case, it gives me butterflies. I dont know whats going on and with all the 485 applications god knows whats going to happen. I hope u get it soon.
2010 2007 Ford Mustang Shelby Gt500
finimits
05-03 09:55 AM
Hi Saji007,
Really? That is very encouraging indeed.
Even I have currently 5.5 years done on my H1B and looking to change soon.
BTW, I have my I-140, but I am not sure is there was ever a document they sent me with the PERM. Are these both the same thing?
I guess I don't have the PERM approval notice with me. Is this a hard requirement and if so do employers generally give the PERM approval notice to employees on request?
Really? That is very encouraging indeed.
Even I have currently 5.5 years done on my H1B and looking to change soon.
BTW, I have my I-140, but I am not sure is there was ever a document they sent me with the PERM. Are these both the same thing?
I guess I don't have the PERM approval notice with me. Is this a hard requirement and if so do employers generally give the PERM approval notice to employees on request?
more...
Robert Kumar
03-08 11:47 AM
my brother got recently married and his wife went to stamping in kolkata and they gave 221g for h4 and 2 days later they even cancelled my brothers exiting stamped H1 and his visa.he is in IT industry
any ideas whats next for him.
does he need to apply for a new H1B or can any lawyer help him convince.
Why do u think his H1B got cancelled. Pls share.
any ideas whats next for him.
does he need to apply for a new H1B or can any lawyer help him convince.
Why do u think his H1B got cancelled. Pls share.
hair 2007 Ford Mustang Shelby Gt500
EndlessWait
01-15 07:51 AM
Why is VSC processing so slow..anybody in the same shoes waiting for processing from Vermont. There was a time a normal H1 processing was done in 2 months. Now I've heard it is taking upto 8 months...oh god!
more...
Dhundhun
05-22 01:07 AM
hi thanks your input.
what about my Lud ? when i will see lUD ? I took biometric yesterday and my pd is curent now.
I saw your profile. You are from Nepal.
As far as Soft LUD is concerned, there should be one or two after finger printing. (Refer to http://immigrationvoice.org/forum/showthread.php?t=18737 for EAD cases).
Your priority date is current.
I hope that they must have sent for Name Check long ago - this should not be blocking.
What about processing date (Aug 24, 2007 is receipt date)? There was memo from USCIS that it may take over 18 months for processing date to come around Aug 2007. Your I485 i.e. GC can be blocked by processing date.
For example today Nebraska is processing EB based I-485 Application of July 14, 2007. I heard that in a month there was just a change of three days. For Texas, keep on looking at https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=TSC
what about my Lud ? when i will see lUD ? I took biometric yesterday and my pd is curent now.
I saw your profile. You are from Nepal.
As far as Soft LUD is concerned, there should be one or two after finger printing. (Refer to http://immigrationvoice.org/forum/showthread.php?t=18737 for EAD cases).
Your priority date is current.
I hope that they must have sent for Name Check long ago - this should not be blocking.
What about processing date (Aug 24, 2007 is receipt date)? There was memo from USCIS that it may take over 18 months for processing date to come around Aug 2007. Your I485 i.e. GC can be blocked by processing date.
For example today Nebraska is processing EB based I-485 Application of July 14, 2007. I heard that in a month there was just a change of three days. For Texas, keep on looking at https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=TSC
hot 2007 Ford Mustang Shelby Gt500
krishnam70
02-17 05:18 PM
Another op-ed should be coming soon in another media
may be quoting some of the links like below could give the article more coverage.
http://blogs.ilw.com/gregsiskind/2009/02/h1b-visas-and-the-banks-the-real-story.html
may be quoting some of the links like below could give the article more coverage.
http://blogs.ilw.com/gregsiskind/2009/02/h1b-visas-and-the-banks-the-real-story.html
more...
house 2007 Ford Mustang Shelby-GT500
surabhi
05-21 11:56 AM
see my seond posting below from murthy.com forum. You should be able to port the PD
good luck
good luck
tattoo 2007 Ford Mustang Shelby Gt500
eb3retro
03-17 11:07 AM
Just contributed $100.00. Will contribute more in Future...!
thanks to all the people who made this happen and special thanks to the team who went to Washington for our cause.
thanks to all the people who made this happen and special thanks to the team who went to Washington for our cause.
more...
pictures “The Shelby GT builds on the
Hey Ram GC
05-05 05:33 PM
I did try to change the title, but can not. In the body, i did, but main page, i can not.
BUT I can wish about EB3- India to be current soon
BUT I can wish about EB3- India to be current soon
dresses 2007 Ford Mustang Shelby GT500
bestin
03-24 09:31 AM
but does your I-140 need to be approved before you can use your EAD?
NO.U can start using it.But if 140 is denied you cannot renew it.
More importantly (as in my case), can I use my AP to travel if both my I-140 and I-485 are still pending?
Thanks..
Yes you can travel on AP.
NO.U can start using it.But if 140 is denied you cannot renew it.
More importantly (as in my case), can I use my AP to travel if both my I-140 and I-485 are still pending?
Thanks..
Yes you can travel on AP.
more...
makeup 1967 Ford Mustang Shelby GT500
wizpal
08-12 10:46 AM
with your efforts. I hope you don't get banned...
what makes u think that he would be banned for asking such questions - if IV is busy may be some senior members can answer.
what makes u think that he would be banned for asking such questions - if IV is busy may be some senior members can answer.
girlfriend Ford Mustang Convertable 2007
manderson
08-08 11:32 AM
damn! i have the same issue. will u pls post the answer when u have it.
my laywer doesn't know what to put and my employer is not cooperating!
my laywer doesn't know what to put and my employer is not cooperating!
hairstyles Ford Mustang Shelby GT500
paskal
02-22 06:35 PM
you cannot apply for an H4 until your waiver is complete
does not matter how long you are on a J1, once you get one, you are a marked man.
similarly there is no question of filing a 485, even if you could file it there cannot be an approval till the waiver is done, likely will be rejected.
do please ask an attorney though.
does not matter how long you are on a J1, once you get one, you are a marked man.
similarly there is no question of filing a 485, even if you could file it there cannot be an approval till the waiver is done, likely will be rejected.
do please ask an attorney though.
kondur_007
07-24 10:26 AM
???
It really will not matter a whole lot whether you mark Yes to all three or only to the third one. What you do need to do is attach an explanation (that your wife has filed 485, copy of 485 receipt and cover letter explaining that it was filed as a "dependent" petition to your immigration petition).
This questions (all three of them) are designed to screen people with immigrant intent (the whole purpose is to answer the question: does this person have immigrant intent) and once you answer one of them yes, it serves the purpose.
Immigrant intent does not matter for H, O, P visa categories as they are exempt from sec 214(b).
So in nutshell, it would not matter whether you mark all three yes or only third one yes. If I were to be you, I will mark them all yes and attach the explanation (very brief, with highlighted statement that says that she has filed 485 and receipt is attached).
Good Luck, and yes, send it ASAP...:)
It really will not matter a whole lot whether you mark Yes to all three or only to the third one. What you do need to do is attach an explanation (that your wife has filed 485, copy of 485 receipt and cover letter explaining that it was filed as a "dependent" petition to your immigration petition).
This questions (all three of them) are designed to screen people with immigrant intent (the whole purpose is to answer the question: does this person have immigrant intent) and once you answer one of them yes, it serves the purpose.
Immigrant intent does not matter for H, O, P visa categories as they are exempt from sec 214(b).
So in nutshell, it would not matter whether you mark all three yes or only third one yes. If I were to be you, I will mark them all yes and attach the explanation (very brief, with highlighted statement that says that she has filed 485 and receipt is attached).
Good Luck, and yes, send it ASAP...:)
eb2dec2005
02-24 03:01 PM
I did not see any updates on my I140 but just the update on my already approved H1b case.
If my employer has decided to revoke my I140, would i be able to find out , incase he doesn't inform me?
If my employer has decided to revoke my I140, would i be able to find out , incase he doesn't inform me?
Không có nhận xét nào:
Đăng nhận xét